All Done!!!!

Yacht varnish done inside and out and all done.

Shiney Shiney!

I just can't wait to get it in the water now!

Putting in Seats

Decided to put seats on bars at either end. I figured that as I don't want to drill or screw through the side of the canoe then I would need as much surface area to epoxy on the inside.

Taped in place so they are spot on before staring to epoxy

Taped round the joins so the fillets are all good

Epoxy on

With the tape removed the fillets looks good.

Seats in!!! Not much more to do now.

Last epoxy coats inside and out

The last coats of epoxy I spread on using the plastic card that came in the fyne boat build kit.

Seems to go alot further and gives a better finish than using the rollers
All finished and smooth. Spent some time going back over it and sanding a few drips out etc. Over all a good finish.